1. Ds Wifi Setup

Quad Mode 802.11ac Wireless Access Point with Increased Range The NETGEAR® ProSAFE® WAC720 is a high performance 2 x 2 business class dual band 802.11ac wireless Access Point (AP) that can support an aggregate throughput of up to 1.2 Gbps (300 Mbps for 2.4 GHz and 867 Mbps 802.11ac for 5 GHz).

Note: If you are attempting to connect a Nintendo 3DS family system online, ensure wireless communication is enabled prior to continuing. What to Do:. Power cycle your modem and router. Power cycling your wireless router or access point may resolve an issue relating to your network being unresponsive. Ensure the access point being used is compatible with your system. If the access point you are attempting to connect to uses a feature not supported by your system, the wireless network's settings will need to be changed. Attempting to connect a Wii console online?

Try manually setting up the console's Internet connection. Manually entering your network's SSID and password may allow the console to correctly locate and connect to your wireless Internet connection. Ensure the access point being used is broadcasting its SSID. If other devices are able to find your wireless router or access point, this indicates the SSID is being broadcasted. If other devices cannot locate the SSID, or if you cannot confirm this by locating the SSID broadcast option within your router's settings. If this has been disabled, enable the option. Check for wireless interference.

The Apartment Song 12.

Wireless interference can result in weak signal strength and prevent the system from locating your wireless router or access point. Situation Not Resolved.

You can reach us by calling 541-803-8090, or stop by our office. Hours of Operation Sales & Billing Technical Support Office / Lobby Monday 8am - 6pm 24/7 8am - 5:30pm Tuesday 8am - 6pm 24/7 8am - 5:30pm Wednesday 8am - 6pm 24/7 8am - 5:30pm Thursday 8am - 6pm 24/7 8am - 5:30pm Friday 8am - 6pm 24/7 8am - 5:30pm Saturday 8am - 5pm 24/7 Closed Sunday Closed 24/7 Closed For closed Captioning concerns please call 541-330-8399 or fax 541-385-3271. Administrative assistance is available Monday through Friday 8am - 5pm by calling 541-388-5820. This article includes the following:.

For installation instructions, use the following article. Router Light Description Power. On: Power is supplied to the device, and the device has completed its initialization.

Off: Power is not supplied to the Device. Downstream.

On: The gateway has completed its downstream ranging operation. Blink: Searching for Downstream. Upstream. On: The gateway has found both downstream and upstream.

Blink: Searching for Upstream. Off: Searching for downstream. Online. On: Configuration of the cable interface by your cable service provider is complete. Ready for Service. Blink: Both downstream and upstream are established, but configuration of cable interface is not yet complete. Off: Configuration of the cable interface is still in progress.

Ds Wifi Setup

The downstream and upstream have not been established yet. Ethernet. On: A device is detected on the Ethernet port. Blink:Data is being transmitted or received on the Ethernet port. Off:No device is detected on the Ethernet port. WiFi.

On: The wireless access point is operating normally. Blink: Data is being transmitted or received on the wireless interface.

Off: The WiFi is disabled. Secure. Blink:WPS button has been pressed. Search for device to connect to.

Off:WPS is not active, press button to activate for 2 minutes. Connect your computer to the Arris Gateway using an Ethernet Cable. An indicator light on both devices will be lit if the connection is made.

The computer will automatically connect to the Gateway and acquire an IP Address if configured to automatically do so. If the computer does not pull an IP address, you may need to modify the configuration on the computer in order to obtain a connection. Select your operating system to view instructions on how to modify your TCP/IP Settings. Configure Windows TCP/IP Follow these steps:. Windows 7 and Vista: Click the Start button, then right-click Network and choose Properties. Windows XP: Click the Start button then click Control Panel.

Windows 7: On the left, click Change Adaptor Settings. Windows Vista: Under Tasks, click Manage network connections.

Windows XP: Click Network and Internet Connections then click Network Connections. Windows 7 and Vista: Right-click Local Area Connection then click Properties. Windows XP: Double-click Local Area Connection then click Properties.

Windows 7: Click Internet Protocol Version 4(TCP/IPv4) then click Properties. Windows Vista: If the pop-up displays asking for permission, click Continue to open the Local Area Connections Properties window.

Then click Internet Protocol Version 4(TCP/IPv4) then click Properties. Windows XP: Highlight Internet Protocol (TCP/IP) then click Properties. Under the General tab ensure the following are selected:. Obtain an IP address automatically.

Obtain DNS server address automatically. Under the Alternate Configuration tab, ensure that the Automatic private IP address option is checked. Click the Advanced button. Configure MAC OS X TCP/IP Follow these steps:.

From the Apple drop-down menu choose System Preferences, or click the System Preferences icon at the bottom of your screen. Version 10.7: Under Internet & Wireless click Network. Earlier versions: Under Internet & Network click Network. Version 10.7: Click Ethernet. Earlier versions: Click Built-In Ethernet. From the Configure drop-down menu choose Using DHCP. Click the Apply button to save your changes.

Windows 7. Click next to the clock on the start bar. Choose 'ARRIS-XXXX'. Click Connect. Enter your passphrase.

For information on how to obtain or change your passphrase, Windows Vista. Click Start. Click Connect to. Choose 'ARRIS-XXXX'. Click Connect. Enter your passphrase. For information on how to obtain or change your passphrase, Windows XP.

Click Start. Click Connect to.

Click on Wireless Network Connection. Choose 'ARRIS-XXXX' and click Connect. Enter your passphrase. For information on how to obtain or change your passphrase, MAC OS X.

Click in the menu bar next to the time clock. Select and choose 'ARRIS-XXXX' from the dropdown list. Related Articles.